Overview of flash steam dryer equipment

Flash -steaming dryer is a new type of continuous drying equipment that integrates drying, crushing, and screening. It is especially suitable for drying cake -like, paste paste, and slug -like materials. The drying time in the drying tower is only tens of seconds, and the water evaporates instantly. The quality of the dry product has a lot to do with the temperature, wind speed, air volume, and broken speed of drying. Our company has an innovative design plan. By regulating the wind speed, air volume, and broken speed of flashing and drying lines, the size of the finished product particles and the ultimate water content control the ingredients.

The flashing dryer enters the bottom of the dryer from the hot air cut, and a powerful rotation wind field is formed under the driving of the mixer. The material is inserted into the dryer from the screw addter. Under the strong effect of rotating and mixing paddles at a high -speed rotation, the material collision, friction and shear force are dispersed. Essence The low wet content and the smaller granular material rose together with the rotation airflow, which is transported to the separator for gas solid separation.

The working principle of flash steam dryer

Flash -steaming and drying are used to make dampness, heat carriers, and wind turbines to make power to achieve the quality and heat exchange of drying process, so that the humidity in the material changes, and the separation of the material and the wet portion, that is, dry.
Drying generally uses natural air. After the natural wind passes through the air filter, the fan is drum into the steam heat exchanger, coal -fired or fuel or gas heat furnace is heated. Uniform, certain flow rate, whirlwind. The contact, collision of the wet material added by the whirlwind with the spiral addter, and a series of physical changes such as heat exchange, separation, and separation make the material separate from the wet portion and finally dry.

The rotating and steaming drying unit is one of the main equipment produced by our company. The rotating flashing drying unit produced by our company since its own factory and all parts of the country, across pigments, dyes, petroleum, building materials, food, feed, pesticides, and among them Over the years, we have encountered many materials that have been difficult to join, drying and separating for many years. After scientific analysis and experiments, they finally drawn a successful end. So far we have unique drying solutions for different natures, so we have confidence and ability to achieve the requirements of your company's materials drying.

Features
1. Various feed devices are selected, and the feed is continuously stable, which will not produce bridge phenomena.
2. Special cooling devices are set at the bottom of the dryer to avoid the phenomenon of deterioration of materials at the bottom high temperature area.
3. Special air pressure sealing device and bearing cooling device, effectively extend the service life of the transmission part.
4. Special off -the -shelf devices reduce equipment resistance and at the same time make the wind speed in the tower balance.
5. The drying room is equipped with a hierarchical ring and rotation, and the fineness and endwater of the material can be adjusted and controllable.
6. Drying room has a high peripheral air speed and short material stay time, which effectively prevent the metamorphosis of the material sticky wall and thermal material.